Wix POS Register: Using the S700 Card Reader

Your card reader allows you to accept payment from customers by credit card, debit card, and phone app. This card reader connects to your tablet through WiFi.

Make sure the device is fully charged before you use it, so it's ready whenever you want to process a sale. The reader automatically disconnects if the battery dips below a 25% charge.

To set up the card reader, you need to connect it to your tablet via WiFi. If you ever replace your reader, you can use the instructions below to disconnect the old one and connect a new one.

1. Open the POS tablet.

2. Tap the Connect icon .

3. Choose what you want to do:

   • Connect your card reader:

     1. Tap Connect next to Card reader.

     2. Tap Connect New.

     3. Tap the relevant reader.

     4. Tap It's Powered On.

     5. Tap It's Connected.

     6. (Optional) Enter a name for the card reader and tap Continue.

     7. Enter the code shown on your card reader and tap Pair Reader.

     8. Tap Done.

   • Disconnect your card reader:

     1. Tap Unpair at the top right.

     2. Tap Unpair to confirm.

Check for updates to the card reader software from time to time and update the software when available.

1. Open the POS tablet.

2. Tap the Connect icon .

3. Tap Check for Update.

4. If an update is available, tap Update Now and follow the instructions.

If you have any problems operating the card reader, check out these troubleshooting steps.